X2-10GB-CX4光模块产品简介
Cisco X2-10GB-CX4
X2-10GB-CX4光模块
The Cisco 10GBASE-CX4 Module supports link lengths of up to 15m on CX4 cable.
X2-10GB-CX4光模块
Cisco X2-10GB-T
X2-10GB-CX4光模块
The Cisco 10GBASE-T Module supports link lengths of up to 100m on CAT6A or CAT7 copper cable.
X2-10GB-CX4光模块
Cisco X2-10GB-LRM
X2-10GB-CX4光模块
The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3
. For additional information on mode conditioning patch cord requirements please see:
The Cisco 10GBASE-LRM Module also supports link lengths of 300m on standard single-mode fiber (SMF, G.652).
Cisco X2-10GB-LX4
X2-10GB-CX4光模块
The Cisco 10GBASE-LX4 Module supports link lengths of 300m on standard FDDI grade MMF. To ensure that specifications are met, the transmitter output should be coupled through a mode conditioning patch cord. X2-10GB-CX4光模块
Cisco X2-10GB-SR
The Cisco 10GBASE-SR Module supports a link length of 26m on standard FDDI grade MMF. Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700 MHz*km MMF (OM4), up to 400m link lengths are possible.
Cisco X2-10GB-LR
The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).
Cisco X2-10GB-ER
X2-10GB-CX4光模块
The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard single-mode fiber (SMF, G.652).
Cisco X2-10GB-ZR
Supports link lengths of up to about 80 km on SMF. This interface is not part of the 10 Gigabit Ethernet standard but is built according to Cisco optical specifications.
X2-10GB-CX4光模块
Technical Specifications
Platform Support
Cisco X2 modules are supported on Cisco switches and routers. For more details, refer to the document Cisco Xenpak/X2 Compatibility Matrix.
Connectors and Cabling
Connectors: Dual SC/PC connector (-SR, -LR, -LRM, -LX4, -ER, -ZR); InfiniBand 4x connector (-CX4); RJ-45 connector (-T).
Note:For optical X2 modules, only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified in the standards section.
Table 1 provides cabling specifications for the Cisco X2 modules.
Table 1.X2 Port Cabling Specifications
Cisco X2
|
Wavelength (nm)
|
Cable Type
|
Core Size (Microns)
|
Modal Bandwidth (MHz*km)
|
Cable Distance*
|
Cisco X2-10GB-CX4
|
-
|
CX4 (copper)
|
-
|
-
|
15m
|
Cisco X2-10GB-T
|
-
|
CAT6A/CAT7 (copper)
|
-
|
-
|
100m
|
Cisco X2-10GB-SR
|
850
|
MMF
|
62.5
62.5
50.0
50.0
50.0
50.0
|
160 (FDDI-grade)
200 (OM1)
400
500 (OM2)
2000 (OM3)
4700 (OM4)
|
26m
33m
66m
82m
300m
400m
|
Cisco X2-10GB-LRM
|
1310
|
MMF
|
62.5
50.0
50.0
|
500
400
500
|
220m
100m
220m
|
SMF
|
G.652
|
-
|
300m
|
Cisco X2-10GB-LX4
|
1310
|
MMF
|
62.5
50.0
50.0
|
500
400
500
|
300m
240m
300m
|
Cisco X2-10GB-LR
|
1310
|
SMF
|
G.652
|
-
|
10 km
|
Cisco X2-10GB-ER**
|
1550
|
SMF
|
G.652
|
-
|
40 km***
|
*Minimum cabling distance for -LR, -SR, -LX4, -ER modules is 2m, according to the IEEE 802.3ae standard, and minimum cabling distance for -LRM modules is 0.5m, according to IEEE 802.3aq standard.
**Requires 5 dB 1550 nm fixed loss attenuator for < 20 km. Attenuator is available as a spare. The part number is WS-X6K-5DB-ATT=.
***Links longer than 30 km are considered engineered links.
Standards
• IEEE 802.3ae (-LR, -SR, -LX4, -ER)
• IEEE 802.3ak (-CX4)
• IEEE 802.3aq (-LRM)
• IEEE 802.3an (-T)
Table 2 shows the main optical characteristics for the Cisco X2 module. The Cisco X2-10GB-CX4 and X2-10GB-T are not optical modules and therefore are not listed in Table 2.
X2-10GB-CX4光模块
Table 2.Optical Transmit and Receive Specifications
Product
|
Type
|
Transmit Power (dBm)*
|
Receive Power (dBm)*
|
Transmit and Receive Wavelength Range (nm)
|
Maximum
|
Minimum
|
Maximum
|
Minimum
|
Transmit
|
Receive
|
Cisco X2-10GB-SR
|
10GBASE-SR 850 nm MMF
|
-1.2**
|
-7.3
|
-1.0
|
-9.9
|
840 to 860
|
Cisco X2-10GB-LRM
|
10GBASE-LRM 1310 nm MMF
|
0.5
|
-6.5
|
0.5
|
-8.4 (in average)
and -6.4 (in OMA)***
|
1260 to 1355
|
Cisco X2-10GB-LX4
|
10GBASE-LX4 WWDM 1300 nm MMF
|
-0.5 per lane
|
-6.75 per lane in OMA
|
-0.5 per lane
|
-14.25 per lane in OMA
|
Four lanes; overall range: 1269 to 1356
|
Cisco X2-10GB-LR
|
10GBASE-LR 1310 nm SMF
|
0.5
|
-8.2
|
0.5
|
-14.4
|
1260 to 1355
|
1260 to 1565****
|
Cisco X2-10GB-ER
|
10GBASE-ER 1550 nm SMF
|
4.0
|
-4.7
|
-1.0
|
-15.8
|
1530 to 1565
|
1260 to 1565****
|