NM-4T思科原装线卡模块产品简介

The four-port synchronous NM-4T思科原装线卡模块(sync) serial network module (NM-4T) has four DB-60 ports and provides a data rate of 8 Mbps on port 0, 4 Mbps each on port 0 and port 2, or 2 Mbps on all four ports simultaneously. The NM-4T network module only supports sync mode. The DB-60 ports on the NM-4T network module support NM-4T思科原装线卡模块the Cisco cables used on the Cisco 2500 and Cisco 7000 series routers.

Prerequisites NM-4T思科原装线卡模块

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Product Number NM-4T思科原装线卡模块

NM-4T - Four-Port Sync Serial Network Module

Features NM-4T思科原装线卡模块

• Four serial ports.

• Supports sync mode only (async mode is not supported).

• Provides synchronous data rate of 8 Mbps on port 0, 4 Mbps each on port 0 and port 2, or 2 Mbps on all four ports simultaneously.

• Does not support bisync or half-duplex.