产品分类
联系我们
AVAGO光模块回收
首页 » 产品展示 » 各类名牌光纤模块回收 » AVAGO光模块回收
GLC-FE-FX=思科原装光纤模块
发布时间:2013-12-5 9:15:19 点击量:
The Cisco 100BASE-BX10 (part numbers GLC-FE-FX=思科原装光纤模块GLC-FE-100BX-D and GLC-FE-100BX-U) SFPs operate on ordinary SMF single-strand link spans up to 10 km long. A 100BASE-BX10-D device is always connected a 100BASE-BX10-U device with a single GLC-FE-FX=思科原装光纤模块strand of standard SMF with an operating transmission range up to 10 km. The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices as depicted in Figure 2. 100BASE-BX10-D transmits a 1550-nm channel and receives a 1310-nm signal, whereas a 100BASE-BX10-U transmits a 1310-nm wavelength and receives a 1550-nm signal. Note in Figure 2 the presence of a wavelength-GLC-FE-FX=思科原装光纤模块division multiplexing (WDM) splitter integrated into the SFP to split the 1310-nm and 1550-nm light paths.
GLC-FE-100EX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet GLC-FE-FX=思科原装光纤模块ports of Cisco switches and routers.
上一条:GLC-FE-100LX V01思科原装光纤模块 | 下一条:GLC-FE-100EX思科原装光纤模块